Weberset Fastfix Tile Adhesives

weberset fastfix is a fast setting, highly polymer modified, high-performance thin-set adhesive, for fixing tiles, stones and mosaics, on a variety of surfaces, for wall and floor application, in internal as well as external area. It is designed for installation of tile & stones for overnight repair, renovation and faster fixing, to which water needs to be added before application.
UV resistence (model term)
 
Self curing
 
Easy to use
 
High durability
Low dust (model term)
Gradually add 2.5 parts of Weberset fastfix to 1 part of clean water (by volume) and mix it to a lump-free, smooth, workable paste using a suitable stirrer / low-speed drill mix / or any other appropriate tool.
After mixing allow the mixture to stand for 2 minutes for it to mature.
Highly polymer-modified: provides high structural adhesion, which allows to be used on a variety of substrates, for fixing a variety of tiles and stones.
Faster installation of tile and stone due to quick setting and hydration time.
No Hacking of substrate required to achieve the required bonding.
For overnight repair and renovation of tiles and stone in restaurants, food chain outlet, supermarkets, malls, hospital, airports, metro station etc.
Due to fast setting & hydration time allows grouting on wall & floor from 3- 6 hours.
Can be used for new construction, as well as for renovation over existing floors for tile-on-tile application/facades.
Internal and external use.
Lightfoot traffic after 3- 6 hrs. and completely cured after 24 hours of tile & stone installation.
No-sag formula: allows for hassle-free application on vertical walls, without any slippage.
Self-curing properties, which allows for no-hassle application, with minimum labour.
The free-flowing product makes it easier to mix and apply.
Water-resistant, making it suitable for swimming pools, bathrooms, kitchen, saunas, and spa.
Sustains heat ageing, making it ideal for high-temperature locations for outdoor use, and also for hot temperature applications, like Jacuzzi, sauna etc.
No shrinkage prevents debonding and gives longer life to tiles and stones.
Useful for bed thickness of 3 - 6 mm. May go up to 10 mm to a limited extent.
Do not use on wet screed or plaster. The surface must be fully cured.
Do not use on gypsum plaster or boards, fibre cement boards, or other drywall partitions.
Do not use on epoxy or polyurethane waterproofing.
Do not use for Installing glass tiles or metal tiles.
Use only weber bond poxy, for fixing glass and metal tiles.
Do not use on metal, rubber, plastics, vinyl, linoleum surface, painted substrates. Contact weber representative for fixing these.
Do not use on surfaces subject to vibrations. Use weberset flex for vibration prone areas.
Do not use for fixing artificial stone or impregnated stone. Use weberset ultra for the same.